0
Wiring and technical diagrams

Connecting a Shelly 2.5 to a roller shutter

January 25, 20221 min read

Previous model. This guide was written for the Shelly 2.5, which has been replaced by the Shelly 2PM Gen4. The wiring is the same, and the settings are in the same places in the Shelly Smart Control app. The diagram below is already drawn for the new model. Go to the Shelly 2PM Gen4 →

Wiring diagram

שרטוט חיבור Shelly 2PM Gen4 לתריס חשמלי: החוט המשותף של המנוע לאפס, עלייה ל-O1, ירידה ל-O2, מפסק התריס ל-S1 ו-S2

Open the diagram full size

The previous diagram from the original guideWiring diagram of a Shelly 2.5 relay connected to a 220 V electric shutter switch, showing live, neutral and the two shutter motor outputs

Legend

  • Setup:
  • Shutter control settings: in the app, tap the device you want to configure > Settings > Settings:
  • All done 🙂

Settings in the app

1

Mode: choose Roller Shutter.

2

Power-on default mode: choose Stop.

3

Button Type: Momentary.

4

Position Control: tap Calibrate. The shutter will go up and down twice to measure its travel, so you can open it by percentage.

Need help with installation or setup?
Ask us, book an electrician who knows Shelly devices, or plan your home for free.

More articles

All articles →
January 25, 2022Connecting a Shelly 2.5 to lightingConnecting a Shelly 2.5 to two 220 V light switches Setup: Lighting control settings: in the app, tap the device you want to configure > Settings…Read →January 25, 2022Connecting a Shelly 2.5 to a two-way switchConnecting a Shelly 2.5 to a two-way switch Setup: Settings: in the app, tap the device you want to configure > Settings > Settings: Mode: choose…Read →November 17, 2026מתכנן בית חכם: איך מתכננים את הבית ומקבלים הצעות מחיר מחשמלאיםאיך משתמשים במתכנן הבית החכם של OZZI בכ-2 דקות, ואיך מקבלים הצעות מחיר מחשמלאים מוסמכים להתקנה. מדריך עם צילומי מסך, בחינם ובלי התחייבות.Read →