Previous model. This guide was written for the Shelly Plus 1, which has been replaced by the Shelly 1 Gen4. The wiring is the same, and the settings are in the same places in the Shelly Smart Control app. Go to the Shelly 1 Gen4 →
Wiring diagram
Legend
- Setup:
- Water heater control settings: in the app, tap the device you want to configure > Settings > Settings:
- All done 🙂
Settings in the app
1
Power On Default Mode: choose Restore Last Mode.
2
Device Type: choose Water Heater, or the matching load type.
3
Button Type:
- With a standard toggle switch: choose Edge Switch.
- With a push button (spring-return switch): choose Momentary.
How to choose "Edge" in the new app, with screenshots: The full guide →