0
Wiring and technical diagrams

Connecting a Shelly Plus 1PM to lighting

May 31, 20221 min read

Previous model. This guide was written for the Shelly Plus 1PM, which has been replaced by the Shelly 1PM Gen4. The wiring is the same, and the settings are in the same places in the Shelly Smart Control app. The diagram below is already drawn for the new model. Go to the Shelly 1PM Gen4 →

Wiring diagram

שרטוט חיבור Shelly 1PM Gen4 לגוף תאורה עם מפסק קיר: פאזה ל-L ולמפסק, המפסק ל-SW, גוף התאורה בין O לאפס

Open the diagram full size

The previous diagram from the original guideShelly Plus 1PM wiring diagram for lighting with a wall switch

Legend

  • Setup:
  • Lighting control settings: in the app, tap the device you want to configure > Settings > Settings:
  • All done 🙂

Settings in the app

1

Power On Default Mode: choose Restore Last Mode.

2

Device Type: choose Light, or the matching load type.

3

Button Type:

  • With a standard toggle switch: choose Edge Switch.
  • With a push button (spring-return switch): choose Momentary.

How to choose "Edge" in the new app, with screenshots: The full guide →

Need help with installation or setup?
Ask us, book an electrician who knows Shelly devices, or plan your home for free.