Previous model. This guide was written for the Shelly Plus 2PM, which has been replaced by the Shelly 2PM Gen4. The wiring is the same, and the settings are in the same places in the Shelly Smart Control app. The diagram below is already drawn for the new model. Go to the Shelly 2PM Gen4 →
Connecting a Shelly Plus 2PM to two 220 V light switches
Wiring diagram
The previous diagram from the original guide
Legend
- Setup:
- Lighting control settings: in the app, tap the device you want to configure > Settings > Settings:
- All done 🙂
Settings in the app
1
Mode: choose Relay.
2
Power On Default Mode: choose Restore Last Mode.
3
Device Type: choose Light.
4
Button Type:
- With a standard toggle switch: choose Edge Switch.
- With a push button (spring-return switch): choose Momentary.
How to choose "Edge" in the new app, with screenshots: The full guide →